Regeneration is the process of restoring full technical and operational efficiency to elements that have failed, worn out or changed to lower technical parameters.
What is the regeneration of EGR systems?
In the case of exhaust gas recirculators themselves, regeneration consists in mechanical replacement of damaged or worn elements with completely new ones. The most important in the regeneration process are the technical parameters of new elements, so that they meet the stringent technical requirements of truck manufacturers such as MAN, Scania, DAF or Volvo, as well as experience and a machine park for regeneration.
EGR system – what is it for?
The EGR itself is an element that eliminates dangerous compounds of particulate matter in exhaust gases for the legally required euro4, euro5 or currently euro6 emissions. Of course, the exhaust gas recirculator together with the EGR valve does not lead in a straight line to lowering, but is an important and inseparable element to be able to obtain such parameters.
EGR systems in MAN, Scania, DAF, Volvo and Mercedes trucks
Manufacturers of MAN, DAF, Volvo, Mercedes and Scania trucks have developed EGR valves or a single EGR valve in vehicles to ensure that their products meet the required Euro6 emission standards. However, the operation of trucks leads to a situation where they fail, and the purchase of new ones at authorized manufacturers’ stations is often 2 or even 3 times higher than the purchase of regenerated EGR valve units, and the warranty remains the same for both solutions.
New 12 months warranty, regenerated purchased at www.arcoore.com or a stationary store at Jana Długosza 59 in Wrocław also 12 months warranty with no mileage limit.
Featured Products:
No products were found matching your selection.
EGR systems at Arcoore.com
Arcoore offers all models for MAN brands – TGX, TGL, TGS, TGM or MAN City Lion’s city buses or MAN Lion’s Coach tourist coaches, Scania series R, S, P, T, G with euro4, euro5 and euro6 emission standards with different powers Scania R 420, Scania R 440, Scania R 480, also for Mercedes Actros MP4 or Volvo FH6, Volvo FH13.
For regeneration, we use only proven elements such as O-rings, valves, gaskets, and shell-and-tube coolers. In addition, we regenerate the entire damper by replacing the shaft and plates closing the dampers.
Visit the website www.arcoore.com or visit the company’s office at Jana Długosza 59 in Wrocław.